MacBook Pro 13″ 2012 Heat Sink Replacement:
Introduction: The MacBook Repair In Kolkata is a trustworthy online place where you can repair any kind of MacBook issues. If you are facing any MacBook regarding issues like screen damage, dead battery issues, RAM issues, body damage, motherboard issues, hinge damage or broken, Heat sink, etc. then it’s the time to repair your device or replace the spare parts if required. We provide the MacBook service for MacBook Pro and MacBook Air. We also provide some information regarding any damage issues that occur on your MacBook and you can fix these issues at home. So, here the question is How To Replace MacBook Pro 13″ Retina Display Late 2012 Heat Sink? Here we provide some steps that are the best way to replace your MacBook Heat Sink issues.Tools you can use:
- MacBook Pro and Air 5-Point Pentalobe Screwdriver
- T5 Torx Screwdriver
- T6 Torx Screwdriver
- Tweezers
- Philips #00 Screwdriver
The following steps of How To Replace MacBook Pro 13″ Retina Display Late 2012 Heat Sink:
Step – 1
Lower Case
- Two 2.3 mm P5 Pentalobe screws
- Eight 3.0 mm P5 Pentalobe screws
Step – 2
Battery Connector
- Two 2.8 mm T6 Torx screws
- One 7.0 mm T6 Torx shouldered screw
Step – 3
Battery Contact Board
- With the help of tweezers just grasp the Interposer and lift it off the logic board and remove it.
Step – 4
Heat Sink Assembly
- Remove these screws that secure the heat sink to the logic board.
- One 2.4 mm Phillips #00 screw
- One 3.4 mm T5 Torx screw
- Four 2.7 mm T5 Torx screws
Step – 5

- Lift and remove the heat sink up off.
- Carefully remove the left and right fan of the heat sink.
Step – 6
Heat Sink
- The heat sink remains.
Why choose MacBook Repair In Kolkata?
- Best certified and experienced engineers and technicians hired by the MacBook Repair Center.
- The latest techniques used by us.
- Free pickup and delivery service.
- Parts protection and parts warranty for secure service.
- The great support team for all customer queries.
Frequently Asked Questions:
- What Kind Of Precautions You Must Take During MacBook Heat Sink Replacement?
- The first and most important thing is you must use globes during this process.
- Because your MacBook is a delicate device and globes protect it from bacteria, sweating or any other harmful components that is present on your hand.
- Also, the rubber and plastic material is safe because it protects you from electric shock.
- Also, gently use the tools like a spudger or screwdriver, so that your device is in better condition after replacement.
- What are the important tools needed in the MacBook Heat Sink Replacement process?
- MacBook Pro and Air 5-Point Pentalobe Screwdriver
- T5 Torx Screwdriver
- T6 Torx Screwdriver
- Tweezers
- Philips #00 Screwdriver
- How To Tell If MacBook Heat Sink Is Bad?
- Failure to read or write a file to the hard drive
- Your MacBook overheating issues
- Active applications often freeze or crash
- Performance loss, especially when accessing large files