How To Do MacBook Pro 13″ Retina Display Late 2012 SSD Replacement?

eplace MacBook Pro 13" Retina Display

MacBook Pro 13″ Retina Display Late 2012 SSD Replacement:

Introduction: The MacBook Repair In Kolkata is a trustworthy online place where you can repair any kind of MacBook issues.  If you are facing any MacBook regarding issues like screen damage, dead battery issues, RAM issues, body damage, motherboard issues, hinge damage or broken, Heat sink, etc. then it’s the time to repair your device or replace the spare parts if required. We provide the MacBook service for MacBook Pro and MacBook Air. We also provide some information regarding any damage issues that occur on your MacBook and you can fix these issues at home. So, here the question is How To Do MacBook Pro 13″ Retina Display Late 2012 SSD Replacement? Here we provide some steps that are the best way to replace your MacBook SSD issues.

Tools you can use:

  • MacBook Pro and Air 5-Point Pentalobe Screwdriver
  • T5 Torx Screwdriver
  • T6 Torx Screwdriver
  • Tweezers
  • Spudger

The following steps of How To Do MacBook Pro 13″ Retina Display Late 2012 SSD Replacement:

Step – 1

Lower Case How To Do MacBook Pro 13" Retina Display Late 2012 Heat Sink Replacement Gently remove the ten screws that secure the lower case to upper case:
  • Two 2.3 mm P5 Pentalobe screws
  • Eight 3.0 mm P5 Pentalobe screws
Then just remove the lower case.

Step – 2

Battery Connector How To Do MacBook Pro 13" Retina Display Late 2012 Heat Sink Replacement For the battery removal first, remove the screws that secure battery connector board to the logic board
  • Two 2.8 mm T6 Torx screws
  • One 7.0 mm T6 Torx shouldered screw
With the help of T6 Torx screw just remove the wide head 6.4 mm that secure the battery connector to the logic board assembly.

Step – 3

Battery Contact Board How To Do MacBook Pro 13" Retina Display Late 2012 Heat Sink Replacement With the help of tweezers just grasp the Interposer and lift it off the logic board and remove it.

Step – 4

SSD Assembly How To Do MacBook Pro 13" Retina Display Late 2012 SSD Replacement
  • By using the spudger just pry the SSD cable connector up.
  • Carefully tilt and remove the SSD assembly.

Step – 5

How To Do MacBook Pro 13" Retina Display Late 2012 SSD Replacement
  • Just remove the single 2.9 mm that secure the SSD and SSD tray.
  • Pry the side of the SSD opposite SSD tray socket.

Step – 6

How To Do MacBook Pro 13" Retina Display Late 2012 SSD Replacement
  • Carefully pull the SSD straight out of its socket on the SSD tray.
  • SSD remains.
        Here, we provide complete information about the MacBook Pro 13″ Retina Display Late 2012 SSD Replacement. It helps you to fix the SSD related issues at home. For more information visit our website. But sometimes it is not easily resolved, in this case, don’t try to fix it at home. At, MacBook repair in Kolkata we can resolve any kind of SSD related issues at a very affordable cost. We always use the latest technology to repair or fix the problems. Images are taken from iFixit.

Why choose MacBook Repair In Kolkata?

  • Best certified and experienced engineers and technicians hired by the MacBook Repair Center.
  • The latest techniques used by us.
  • Free pickup and delivery service.
  • Parts protection and parts warranty for secure service.
  • The great support team for all customer queries.

Frequently Asked Questions:

 
  1. What Kind Of Precautions You Must Take During MacBook SSD Replacement?
  • The first and most important thing is you must use globes during this process.
  • Because your MacBook is a delicate device and globes protect it from bacteria, sweating or any other harmful components that is present on your hand.
  • Also, the rubber and plastic material is safe because it protects you from electric shock.
  • Also, gently use the tools like a spudger or screwdriver, so that your device is in better condition after replacement.
  1. What are the important tools needed in the MacBook SSD Replacement process?
The important tools are:
  • MacBook Pro and Air 5-Point Pentalobe Screwdriver
  • T5 Torx Screwdriver
  • T6 Torx Screwdriver
  • Tweezers
  • Spudger
  1. How To Tell If MacBook SSD Is Bad?
There are so many reasons that your MacBook becomes faulty like factory defect and extensive use, accidentally falls or spills, water damage, etc. And the signs of the bad SSD are:
  • Failure to read or write a file to the hard drive
  • Your computer or file system needs to be repaired
  • Active applications often freeze or crash
  • Repeated errors when moving files
  • Performance loss, especially when accessing large files
error: Content is protected !!